Stay Informed. Solve Technical Challenges.

Technical Article

Technology

Environmental Knowledge

Parts Knowledge

All

Parts Knowledge

FRP Composite Material Really as Good as You Think? FRP Waste Management

FRP, or Fiber-reinforced plastic, is a composite material made of glass fibers and resin. It is characterized by its lightweight, rigidity, non-conductivity, and corrosion resistance, making it a widely used material worldwide. Products made from FRP include bathtubs, cooling towers, yachts, building materials, printed circuit boards, household appliances, automotive parts, and aerospace components. Its applications span from everyday consumer goods to the aerospace industry.

2024/10/15

Technology

How to Reduce the Noise Volume of Cooling Tower?

Cooling towers are essential for many industrial and commercial applications, operating around the clock to maintain optimal temperatures. However, the noise generated by cooling tower operations can pose significant challenges, not only disturbing neighbors but also potentially damaging equipment and shortening its service life. So, how can we effectively address this noise issue?

2019/09/23

Technology

Boosting the Heat Rejection Capacity of Your Cooling Tower

A cooling water system is a common fixture in industrial factories, primarily designed to reject heat and prevent equipment from overheating. The efficiency of a cooling tower is a crucial factor affecting production line capacity. Issues like poor cooling water management, inadequate maintenance, and improper pipe fitting can significantly impact a cooling tower's performance.

2019/08/22

Technology

Rapid Methods for Cooling Tower Maintenance

Cooling towers are essential in industrial settings, ensuring efficient heat rejection and stable production. However, maintenance is crucial to avoid fouling and equipment contamination. This guide outlines rapid maintenance methods for both open and closed-circuit cooling towers.

2017/04/24

Technology

Comparison of Crossflow and Counterflow Cooling Towers: Introduction to Water Flow Principles

Cooling towers are indispensable in industrial production, facilitating the dissipation of waste heat generated during manufacturing processes by exchanging heat between water and air. Among the various types of cooling towers, crossflow and counterflow are the most common. This article introduces the principles, features, and comparisons of these two types of cooling towers, along with an in-depth discussion on the principles of water flow.

2017/03/03

Technology

Mixed (Combined) Flow vs. Cross Flow & Counter Flow Cooling Towers

Understanding the differences between cooling tower types is essential for optimizing industrial cooling systems. Based on the flow direction of cooling water and air, cooling towers are generally categorized into cross flow, counter flow, and mixed (combined) flow types. This article explores the characteristics and advantages of each type.

2017/03/01

Technology

Water Saving in The Cooling Tower

Cooling tower water consumption primarily results from evaporation, blow-down, splash, and drift losses. Evaporation alone accounts for 55-85% of total consumption and can exceed 80% in continuous-operation plants. Here's a closer look at the factors influencing water consumption :

2017/02/16

Environmental Knowledge

The Impact of Limescale on Heat Exchange and Power Consumption

The presence of limescale in cooling systems can significantly interfere with heat exchange processes, leading to increased power consumption and reduced efficiency. This document, based on the Bureau of Energy, Ministry of Economic Affairs' 2012 Power Industrial Technical Proposal, outlines the effects of limescale on power consumption and heat exchange rates in industrial cooling systems.

2016/11/24

Environmental Knowledge

Causes and Processes of Scale Formation: How to Prevent and Remove Scale

Scale, primarily composed of calcium carbonate (CaCO₃), is prevalent in groundwater and natural water bodies. As a metallic ion, scale mainly consists of minerals such as calcium carbonate, calcium sulfate, and magnesium chloride. When the concentration of these minerals exceeds a certain level, chemical reactions occur at high temperatures, forming irreversible flaky scale known as calcium carbonate scale...

2016/09/20

Environmental Knowledge

Definition and Importance of Wet Bulb Temperature

Wet bulb temperature (WB) is the temperature air would have if cooled to 100% relative humidity by the evaporation of water into it, with the latent heat being supplied by the air. It is a critical factor in the performance of cooling systems, particularly evaporative cooling systems like cooling towers.

2015/05/16

Technology

Calculating the Cooling Capability for Your Equipment

Accurately calculating the cooling capability for your equipment is crucial for selecting the right cooling tower. This guide provides a simple formula for calculating heat rejection capacity and tips for choosing the appropriate cooling tower.

2015/05/16

Technology

What is a Cooling Tower? Why Closed Circuit Cooling Towers Prevent Scale in Piping?

Cooling towers reject waste heat to the atmosphere by using water. Generally, cooling efficiency is based on the wet bulb temperature. Wet bulb temperature is crucial for the efficiency of a cooling tower as it integrates various scientific principles, including aerodynamics, thermodynamics, fluid dynamics, chemistry, biochemistry, and materials science. Common applications include the plastic injection industry, centrifugal furnace casting industry, refineries, petrochemical plants, chemical plants, and other industrial fields.

2013/12/31

Technology

Comparison Between a General Cooling System and a Closed Cooling System

The primary function of a closed-circuit cooling tower is to prevent external impurities from entering the cooling pipes, ensuring that the cooling water remains clean and maintains a stable temperature. The system is divided into an internal circuit system and an external circuit system by a heat exchanger.

2013/12/31

Technology